1.Fast and easy installation
2.Lower heat storage and fuel costs
3.This design creates a very ligh lining, less steel required
4. Several anchor systems
| Item | Common | Standard | H Pure | H Alumina | H Zirconium |
| AL203(%) | 44 | 46 | 47-50 | 52-55 | 39-40 |
| Fe2O3(%) | 1.2 | 1.0 | 0.2 | 0.2 | 0.2 |
| ZrO2(%) | – | – | – | – | 15-19 |
| Classification Temperature (°C) | 1100 | 1260 | 1260 | 1360 | 1430 |
| Working Temperature (°C) | 1000 | 1050 | 1100 | 1200 | 1350 |
| Density (kg/m3) | 220 ±15 | 220 ±15 | 220 ±15 | 220 ±15 | 220 ±15 |
| Permanent linear shrinkage(%)(after24 hours, density 128kg/m3) | -4 (1000°C) |
-3 (1000°C) |
-3 (1100°C) |
-3 (1250°C) |
-3 (1350°C) |
Ceramic industry
1.Low mass kiln cars
2.Continuous and batch kilns
3.Door linings
4.Glazing, porcelain furnace linings
Power generation
1.Duct lining
2.Heat recovery steam system
3.Boiler insulation
4.Stack linings
Refining and petrochemical
1.Ethylene furnace roof and walls
2. Pyrolysis furnace lining
3. Reformer furnace roof and walls
4. Boiler linings
Steel industry
1.Ladle pre-heaters and covers
2. Heat treat furnace
3. Soaking pit covers and seals
4.Heaters and reformer lining
Others
1.Incineration equipment
2.Burner blocks
3.Induction furnace covers
4. Glass tempering furnace.
